Osburn AC02006 Manual de usuario

45515A Printed in Canada 05-06-2012 LINER FASTENING SYSTEM AC02006 INSTALLATION INSTRUCTIONS Stove Builder International inc. 250, rue de C

10 8 To secure the liner to the insert, install the adapter parts in the following order: the tightening handle, the washers (needed quantity varies

11 9 Reinstall into the firebox the baffle components removed in step 6.

2 This liner fastening system contains the following parts: Flue outlet adapter Self-drilling screws #8 x 3/4" Quadrex (30160) 1x 3x

3 Other required parts (not included): 1x Chimney flexible liner adapter (Provided by the flexible liner’s manufacturer) 1x Stainless stee

4 Dimensions of the assembled liner fastening system

5 1 Install the liner adapter to the flexible liner 2 Remove the stainless steel nut, the four washers and the tightening handle mounted on the ret

6 3 Use a powered driver to secure the flue outlet adapter to the flexible liner adapter with three self-drilling screws and use the holes in the flu

7 4 Drop the flexible liner in the chimney flue. 5 Install the insert into the masonry hearth.

8 6 Remove the components located in the upper area of the firebox in order to access the chimney flue. Depending on the type of insert the following

9 7 From inside the firebox, reach up for the flue outlet adapter’s transverse rod and pull down in order to insert the adapter into the flue collar